Re: FLASH: One more question.

[John Croteau]

Hi Shawn,


>  John had replyed to the first /msg and was very helpful.

>  The below actions that you have shown work fine, but the one thing that I

>  do not really understand and have been looking for some good writeups on

>  is the "levels".

>  I understand how everything works but the levels,

>  the Load Movie ("1.swf", 5).

>  I do not really understand why level 5, why not 1 or 10 or 20.

>  Can someone explain this to me or point me in a good direction.

Any level except zero would work, 5, 10 and 20 are all good choices.

Using one is a poor choice because if you decide to change something and

add a Level between the two using level one would require changing all

the _level1 references to higher numbers. 


Levels can be from 0-16000 so leave yourself some room for updating and

changes. Level zero is reserved for the initial movie. Higher levels

overlay lower ones.


-----------                               -----------------------

John Croteau

croteauerols [dot] com (mailto:croteauerols [dot] com)

-------------                             -------------------------

FlashTek  (Advanced Websites with Flash) http://www.FlashTek.com/

Flash Bible (Fast track to good Flash)  http://www.FlashBible.com/

Flash Central(The Universe Starts Here) http://www.FlashCentral.com/

The Flash Tech Resource (Tech Notes)   http://www.FlashCentral.com/tech/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


------------------------------------------------------------------------

To UNSUBSCRIBE send: unsubscribe flasher in the body of an

email to

list-managershocker [dot] com

.  Problems to:

helpchinwag [dot] com

N.B. Email address must be the same as the one you used to subscribe.

For info on digest mode send: info flasher to

list-managershocker [dot] com