Re: FLASH: Trouble Importing Sounds in Flash 4

[Paul Kaiser]

Howdy,


I tried to get Flash 4 to mess up when importing sound files.

Here is what I found:


-- You cannot import an AIFF file with "MAC3" compression

-- You cannot import an AIFF file with "MAC6" compression


On the Mac, you cannot import WAV files, but on the PC, be aware there are

the following compression types:

-- A-LAW

-- IMA

-- PCM

-- uLAW


I don't use a PC, so I cannot test them for you. However, you could run

into compressed file problems just as with the AIFFs.


FWIW, I run Flash with 20 Megs on a Mac most of the time without problems.

As I get up around 20+ Symbols and especially import numerous bitmaps, then

I get memory messages and usually end up going to around 40 Meg or 80 Meg

if I just don't want to mess with changing memory allocation on a big

project. Quitting Flash and re-opening can also help you if you just don't

have the extra memory to begin with.



>    Hello  All! I'm trying to import sound files into Flash 4 and I'm

>getting a "this  file type is not recognized" error message. I've  tried

>importing both .wav and .aif formats with several different files. I'm

>doing it just as the help files describe. What's up?   Thanks, Mick

>Glass  Eye Entertainment





------------------------------------------------------------------------

To UNSUBSCRIBE send: unsubscribe flasher in the body of an

email to

list-managershocker [dot] com

.  Problems to:

helpchinwag [dot] com

N.B. Email address must be the same as the one you used to subscribe.

For info on digest mode send: info flasher to

list-managershocker [dot] com